|
|
ATV and Motorcycle Powder Coating Prices Since it would be impossible to stock even a fraction of the 6500 colors available and to ensure the best possible finish by coating with fresh powder, the prices listed below are based on the stock colors of Cloud White, Ink Black, Red, Blue, Green, Yellow, Orange and Clear. Any other colors or additives such as flattner or Prismatic/Pearls will include a custom color charge. Normally this charge will be $20 but may be higher for certain colors. To guarantee fresh powder our supplier mixes the powder on all orders, with shipping this results in up to a 7-10 day order/delivery time please expect this with any custom color orders. Certain colors require a base coat or top coat to achieve the desired color, as such these colors will be priced as two coat. While we will provide upon request liquid paint with a guaranteed color match to any of our 6500 powder colors we do not apply any type of liquid paints.
Light media blasting/stripping charges are included in the prices on the list. Additional charges will apply to items requiring removal of old powder coating, having intricate detail work, that are covered with multiple layers of paint or other finishes that are not easily removed. Many times it is impossible to tell how hard the coating is going to be to remove until you do it. With this in mind, if we encounter a difficult piece we may need to adjust the price and will contact you. If parts need additional blasting our blasting rate is $50 per hour.
Please call for quotes large orders, or if you are planning on having many parts done at once in one color so we can give you the best price possible. All part must be able to withstand 400 degrees for extended amounts of time. It is the customer's responsibility to disassemble parts including removing all bearings, seals, gaskets, bushings, etc. prior to pre-treatment. Parts should be clean: free of oil and grease. A cleaning charge will be applied for any parts that require additional cleaning.
Items cannot contain any Bondo or filler.
Out gassing is a problem on some cast parts but usually can be controlled with preheating and/or a "out-gassing additive" although with some parts such as old "pot metal" it may be impossible to achieve a blemish free finish.
Chemical pre-treatment and an abrasive media will be used on parts. The maximum size part we are able to coat at this time must fit in a 4' x 4' by 80" tall oven. *All prices are approximations and this price list is subject to change, final price will always be assessed upon actual visual inspection of the item. Minimum job size is $45.* | ATV and Motorcycle Parts | One Coat Solids | Two Coat Candies Textured
or Metallic Colors | Air Cleaner, Front | $40.00 | $55.00 | | Air Cleaner, Back | 25.00 | 35.00 | | Air Cleaner S&S | 15.00 | 25.00 | | Battery Box, Bottom | 20.00 | 30.00 | | Battery Box, Side | 30.00 | 40.00 | | Battery Box, Strap | 10.00 | 15.00 | | Battery Box, Cover | 40.00 | 55.00 | | Belt Guard | 50.00 | 70.00 | | Belt Pulley Cover | 20.00 | 30.00 | | Brackets (up to 6") | 10.00 | 15.00 | | Brake Arm | 20.00 | 30.00 | | Brake Pedals | 30.00 | 40.00 | | Brake Pedal Mount | 30.00 | 40.00 | | Brake Rotors (Center & Edges Only) | 40.00 | 55.00 | | Brake Calipers, 1 pc. | 40.00 | 55.00 | | Cam Cover (All) | 50.00 | 70.00 | | Clutch Perch | 20.00 | 30.00 | | Coil Bracket | 20.00 | 30.00 | | Coil Cover | 25.00 | 35.00 | | Crash Bar (Large) | 50.00 | 75.00 | | Cylinders, pr. | Per Job | Per Job | | Dash | 30.00 | 40.00 | | Derby Cover | 15.00 | 20.00 | | Drive Belt Pulley (Rear) | 80.00 | 110.00 | | Engine Cases, Big Twin (Evo) | 300.00 | 400.00 | | Engine Cases, (Pre-Evo) Textures only | 300.00 | 400.00 | | Engine Cases, Sportster | 375.00 | 500.00 | | Exhaust Shields | 25.00 | 35.00 | | Exhaust Brackets | 25.00 | 35.00 | | Fender Struts | 50.00 | 70.00 | | Frame, Softail | 300.00 | 400.00 | | Frame, Swing Arm | 300.00 | 400.00 | | Frame Rigid | 300.00 | 400.00 | | Foot Pegs, pr. | 40.00 | 55.00 | | Fork Cans | 30.00 | 40.00 | | Fork Legs, (All), pr. | 60.00 | 80.00 | | Hand Levers, pr. | 30.00 | 40.00 | | Handlebar Clamps, pr. | 20.00 | 30.00 | | Handlebar Control Clamps, pr. | 25.00 | 35.00 | | Handlebars, Small | 30.00 | 40.00 | | Handlebars, Large | 40.00 | 55.00 | | Handlebar Risers, pr. | 30.00 | 40.00 | | Handlebar Switching Housing, ea. | 20.00 | 30.00 | | Heads, pr. | Per Job | Per Job | | Headlight Rim | 20.00 | 30.00 | | Headlight Shell | 30.00 | 40.00 | | Headlight Shroud, FL | 100.00 | 140.00 | | Headlight Tin Set, Heritage | 110.00 | 155.00 | | Headlight Visor | 20.00 | 30.00 | | Horn Cover | 20.00 | 30.00 | | Hub, each | 40.00 | 55.00 | | Inspection Cover | 15.00 | 20.00 | | Kick Stand | 25.00 | 35.00 | | Kick Stand Plate | 15.00 | 20.00 | | Lifter Blocks, pr. | 80.00 | 110.00 | Luggage Rack | 80.00 | 110.00 | | Master Cylinders | 45.00 | 60.00 | | Master Cylinder Cover | 10.00 | 15.00 | | Manifold | 45.00 | 60.00 | | Oil Pump Housing | 45.00 | 60.00 | | Oil Pump Cover | 20.00 | 30.00 | | Oil Tank, FXR | 80.00 | 110.00 | | Oil Tank, Spun | 80.00 | 110.00 | | Oil Tank Wraparound | 80.00 | 110.00 | | Points Cover | 15.00 | 20.00 | | Primary Cover, FL/FX/XL | 80.00 | 110.00 | | Primary, Inner | 80.00 | 110.00 | | Push Rod Cover Sets | 65.00 | 90.00 | | Rocker Cover, Shovel, pr. (textures only) | 110.00 | 150.00 | | Rocker Cover, Iron XL, pr. (textures only) | 110.00 | 150.00 | | Rocker Cover, Panhead, pr. | 80.00 | 110.00 | | Rocker Cover, Evolution Set | 120.00 | 165.00 | | Rocket Spacer, ea. | 25.00 | 35.00 | | Shifter Mount | 60.00 | 85.00 | | Shift Pedal | 20.00 | 30.00 | | Shock Spring Covers, ea. | 35.00 | 50.00 | | Shock Springs | 25.00 | 35.00 | | Sissy Bar | 45.00 | 60.00 | | Sprocket | 45.00 | 60.00 | | Sprocket Cover, XL | 60.00 | 85.00 | | Starter End Cover | 20.00 | 30.00 | | Starter Housing | 35.00 | 50.00 | | Starter Mounting Bracket | 10.00 | 15.00 | | Swing Arm, Standard | 90.00 | 125.00 | | Swing Arm Softail | 100.00 | 140.00 | Tank / Fender sets | 500.00-700.00 | 700.00-980.00 | | Trans. Bearing Plate | 40.00 | 55.00 | | Trans. Case, Solid Mount | 130.00 | 180.00 | | Trans. End Cover | 45.00 | 60.00 | | Trans. Mounting Plate | 30.00 | 45.00 | Trans. Release Arm | 15.00 | 20.00 | | Trans. Top Cover | 45.00 | 60.00 | | Triple Trees, Narrow Set | 60.00 | 85.00 | | Triple Trees, Wide Set | 80.00 | 110.00 | | Turn Signal Bar | 30.00 | 40.00 | Turn Signal, ea. | 15.00 | 25.00 | | Turn Signal Visor | 10.00 | 15.00 | | Velocity Stack | 25.00 | 35.00 | | Wheels, Steel Outer Rims Only 16", 18", 19'"& 20", each. | 50.00 | 75.00 | | Wheels, colored inserts | Varies on detail and amount of polishing required | Varies on detail and amount of polishing required | | Solid & Mag Rims, each. | 100.00-220.00 | 140.00-310.00 |
*All prices are approximations and this price list is subject to change, final price will always be assessed upon actual visual inspection of the item. Minimum job size is $45.* If you have any questions/ideas or need a quote, please feel free to contact us at Twisted Edge Powder Coating Bartonville Illinois 309-253-1159 |
|